How to Creat ISO Image file using UltraISO for Windows and Other Software

1. Download and Install UltraISO by Clicking Here. 

(Don't Forget to Read Installation, Registeration Instructions and Rar Password to extract the software folder)

2. Install UltraISO and Register it by given instructions.

Remaining steps are in the form of Images to make you more clear about every step.

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

How to Install Windows 7 and Windows 8 Through Command Prompt by USB

Many People want to install Windows Vista, Seven or 8 with USB drive. So today i tell you that how you can install Windows with USB. This method 'll also help you to install windows in those systems which haven't any Optical DVD or CD drive for example Mini netbooks. n one edge i wanna mention here also that by this method u can install windows in approximately 15 min (although it varies from system to system speed). So follow the below steps to make your USB bootable so that you could install windows through your USB drive :)

1) insert your USB in system (minimum 4 GB capacity USB drive)
2) insert the DVD or CD of windows in optical drive
3) open command prompt to write some commands to make bootable USB (to open command prompt click on start menu.. then click on "Run" then write "cmd" there in box and press enter)
4) enter these following commands in your command prompt which i have written in Red Colour and press enter after every command.
.....a) DISKPART
.....b) LIST DISK
.....c) SELECT DISK 1 (m assuming here that ur USB disk number is 1, but u 'll enter your own USB DISK number which would be shown after entering the command LIST DISK)
.....d) CLEAN (it 'll clean your USB drive)
.....e) CREATE PARTITION PRIMARY
.....f) SELECT PARTITION 1 (m assuming ur USB drive number is 1 which appeared after entering LIST DISK command)
.....g) ACTIVE
.....h) FORMAT FS=NTFS QUICK (format process 'll take few seconds)
.....i) ASSIGN
.....j) Exit (dont close the command prompt.. just minimize it)

5) Now go to "My Computer" and note down the drive letters of DVD or CD drive and USB drive... mostly DVD drive is assigned by "F" and USB drive by "H" but even then note down that which u have in your system...

6) Maximize the command prompt and type F: CD BOOT (m assuming here that your DVD drive letter is F but u 'll enter your own at the place of F in command)

7) CD BOOT

8) BOOTSECT.EXE /NT60 H: (m assuming here that your USB drive letter is H but u 'll enter your own drive letter at the place of H in command)

9) Minimize the command prompt and go to My Computer and copy the DVD or CD all files in you USB drive... when copying process completed then have a smile...:) now your USB drive is bootable and you can install windows through it :) Feel Free to Comment Below if you 'll feel any confusion in any step. I 'll respond there as early as possible to help you :)

NOTE: make first boot device "USB flash drive" by entering in your BIOS setup by pressing F2 or you can press F12 frequently when your PC starts then a boot setup would appear at ur screen then choose Boot from USB drive... but its better to make it first boot device by entering in BIOS setup by pressing F2 :)

How to Update iOS of iphone, ipad, or ipod touch with IOS 5 or Later version

Update your device wirelessly (available in iOS 5 and later)
Ensure your device is connected to a power source. To avoid potential data costs connect your device to a Wi-Fi network.
Go to Settings > General > Software Update. iOS will automatically check for available updates.

3. If an update is available* you can tap Download to download the update.
4. After the download has completed tap Install to update your iOS.

If you leave the update to download in the background, once the download has finished you will receive a notification saying an update is available for your device. Tapping Details will take you to Settings > General > Software Update. Tap Install Now to install the iOS update. If you decide to leave the installation for later Settings will display notification badge until the update has been installed.

* Some iOS updates may not available as over-the-air updates. VPN or proxy connections may prevent your device from contacting the iOS update servers.

PC suite for Nokia Lumia 610 Lumia 510 and Lumia 710 Lumia 800 Lumia 820 Lumia 900 Lumia 920 | Zune PC app Software PC Suite Free Download to Connect Nokia Lumia Windows based Mobile

System requirements and recommendations
To run the Zune software, you must have Windows XP Service Pack 3 (SP3) or a later version of Windows. You can download SP3 for Windows XP here.

To get the most out of the Zune Music + Video software, your computer should meet the following system specifications:

1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
1 gigabyte (GB) of RAM for a 32-bit system or 2 GB of RAM for a 64-bit system
Broadband Internet connection
To wirelessly sync your Zune device to your computer, you need to be connected to a Wi-Fi network.


Troubleshooting for Error
If you are using Windows 7 or Vista and getting error "SYSTEM UPDATES REQUIRED 
Zune software doesn't support Windows Service Pack 2. To continue, click the link below to visit Windows Update to upgrade your operating system to Service Pack 3 or later."


To solve this problem, download the Zune software, update your computer's compatibility mode and then install the Zune software again.

1. On your computer, download the Zune software.
2. On the dialogue box at the bottom of your screen, click or tap the downward-pointing arrow next to Save, click or tap Save as and then save the file to your desktop.
3. From your desktop, right-click or swipe the ZunePackage.exe file.
4. From the drop-down list, click or tap Properties.
5. Click or tap the Compatibility tab.
6. Under Compatibility mode, click or tap to select the Run this program in compatibility mode for check box.
7. Click or tap the downward-pointing arrow, and then select your operating system.
8. Clear the checked box next to Run this program in compatibility mode for.
9. Click or tap Apply, and then OK.
10. Now you can install your Zune software. To start, double-click or swipe the ZunePackage.exe file on your desktop.
11. A series of dialogue boxes will appear. Click or tap Run, click or tap Yes, click or tap Accept and then click or tap Install.
12. When you see Software Installation Complete in the Zune dialogue box, the software is installed.

How to Transfer Audio/Picture/Video Files From Nokia Lumia 510, 610, 520, 710, 800, 820, 900, 920 to PC using Zune PC app Software

1. Install Zune

2. Connect phone and computer

Connect the data cable to the phone socket at the top of your phone and to your computer's USB port.

3. Transfer audio files

• Start the program Zune on your computer.
• Select collection.
• Select MUSIC/VIDEO/PICTURES/PODCASTS
• Go to the required folder.
• Select the required audio file and drag it to the phone icon.